These hinges are a type of hinge that has a spring built into it so when you start to close a cabinet door, the spring, at some point, takes over and pulls the cabinet door closed with a tap. Half overlay hinges are useful for pairs of doors in the middle of a run of cabinets. Designed for frameless cabinet doors, these small hinges help save space in otherwise tight cabinets to improve kitchen convenience.
Hinge requires that the cup drilled in the back of your door is at least 13 mm (1/2 in. D), top hinges required a 12.5 mm cup depth, we recommend that you measure the cup depth on your doors before ordering, many cabinet makers used a 13 mm cup depth even though the requirement was only 12.5 mm so yours may actually already be drilled to 13 mm, each hinge uses 4 each #6 flat head screws and screws are included
Opening angle: 105°, overlay: half overlay, cup diameter: 1-2/5 in. (35 mm), cup depth: 1/2 in. (12.5 mm)
Suitable door thickness: 3/5 in. to 1 in. (16 mm to 24 mm), screw hole center to center: 1-4/5 in. (45 mm), material: cold rolled-steel, finish: nickel plated
Adjustment: 3-way adjustable: side (minus 3 mm to plus 1 mm), depth (plus 3 mm to minus 1 mm) and height (plus 2 mm to minus 2 mm), cabinet type: frameless, bore distance: 1/8 in. (3 mm)