This SaniAccess3 is a complete system with pump, tank, and round bowl (does not include extension pipe). The Saniaccess3 is a system that is used to install a complete bathroom up to 15 ft. below the sewer line, or even up to 150 ft. away from a soil stack. The Saniaccess3 is simplicity itself to install; there are just four connections. The macerator/pump is connected to the spigot of a horizontal rear discharge toilet. The toilet tank is connected to the water supply. The macerator/pump is connected to the small diameter discharge pipe work. The macerator/pump is connected to the electrical supply.
Inside of the unit comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump
When the flush is activated, the water flowing into the Saniaccess3 activates a micro switch in the pressure chamber, which in turn starts the motor
System uses much less water than a regular toilet
An optional extension pipe (030) is available for the pump to be installed behind the wall
Discharge rate at 3 ft. : 27 Gal. / minute
Discharge rate at 15 ft.: 17 Gal. / minute
Discharge: vertically to 15 ft. (4.6m), horizontally to 150 ft. (50m)
Sold separately Saniflo Extension Pipe 030 Internet# 204253704